The production rooms are divided into various sections; every section has its own dedicated purpose and material use. The factory has an efficient product stream to reduce and eliminate contamination during production as much as possible.
 
After producing the raw product forms, the products are moved to the sanding and finishing hall. Here the products are checked for irregularities and, if necessary, repaired and then sanded as preparation for painting (or packing for non painted items).
 
During the paining process, the products first get several ground layers and then 2 to 4 UV proof top coats, depending on item and the desired finish. After painting, the products are placed in the drying rooms for several hours until the paint is completely dry. The painting room is fully closed, air-conditioned and has a constant temperature; it’s a completely dust-free painting environment.
 
When dry, the products are piece by piece subject to a very thorough quality check. After approval, packaging will be done on the basis of the customer’s requested packaging instructions. Containers can be loaded with pallets or loose cartons.
 
The NTN factory is BSCI and ISO 2001 certified and regularly monitored for employee health and safety precautions.

OUR FACTORY

Production of the raw products.
Production of the raw products.
press to zoom
Sanding the raw shapes.
Sanding the raw shapes.
press to zoom
Repairing irregularities.
Repairing irregularities.
press to zoom
Applying layers of spray paint.
Applying layers of spray paint.
press to zoom
Drying room.
Drying room.
press to zoom
Products ready for quality check.
Products ready for quality check.
press to zoom
Packing the products.
Packing the products.
press to zoom
Products ready for carton packing.
Products ready for carton packing.
press to zoom
Cartons ready for shipping.
Cartons ready for shipping.
press to zoom